wd. and no wd. | short | long
Catalogue-no.DescriptionCharacteristicsPrice
corner radius end mill 3 flutes for graphite
d1=3 | l2=4,5 | l1=50 | r=0,3 | d2=4 | z=3 | KAC
suitable for high-speed millingespecially suitable for non-ferrous materialssolid carbideavailable from stock, without obligation
on request1
corner radius end mill 3 flutes for graphite
d1=3 | l2=4,5 | l3=10 | d3=2,9 | l1=50 | r=0,3 | d2=4 | z=3 | KAC
working depthsuitable for high-speed millingespecially suitable for non-ferrous materialssolid carbideavailable from stock, without obligation
on request1
corner radius end mill 3 flutes for graphite
d1=3 | l2=4,5 | l3=15 | d3=2,9 | l1=50 | r=0,3 | d2=4 | z=3 | KAC
working depthsuitable for high-speed millingespecially suitable for non-ferrous materialssolid carbideavailable from stock, without obligation
on request2
corner radius end mill 3 flutes for graphite
d1=3 | l2=4,5 | l3=20 | d3=2,9 | l1=75 | r=0,3 | d2=4 | z=3 | KAC
working depthsuitable for high-speed millingespecially suitable for non-ferrous materialssolid carbideavailable from stock, without obligation
on request2
corner radius end mill 3 flutes for graphite
d1=3 | l2=4,5 | l3=25 | d3=2,9 | l1=75 | r=0,3 | d2=4 | z=3 | KAC
working depthsuitable for high-speed millingespecially suitable for non-ferrous materialssolid carbideavailable from stock, without obligation
on request3
corner radius end mill 3 flutes for graphite
d1=3 | l2=30 | l1=100 | r=0,3 | d2=4 | z=3 | KAC
especially suitable for non-ferrous materialson requestsolid carbide
on request2
corner radius end mill 3 flutes for graphite
d1=4 | l2=6 | l1=50 | r=0,3 | d2=4 | z=3 | KAC
suitable for high-speed millingespecially suitable for non-ferrous materialson requestsolid carbide
on request2
corner radius end mill 3 flutes for graphite
d1=4 | l2=6 | l3=10 | d3=3,8 | l1=50 | r=0,3 | d2=4 | z=3 | KAC
working depthsuitable for high-speed millingespecially suitable for non-ferrous materialssolid carbideavailable from stock, without obligation
on request1
corner radius end mill 3 flutes for graphite
d1=4 | l2=6 | l3=15 | d3=3,8 | l1=50 | r=0,3 | d2=4 | z=3 | KAC
working depthsuitable for high-speed millingespecially suitable for non-ferrous materialssolid carbideavailable from stock, without obligation
on request3
corner radius end mill 3 flutes for graphite
d1=4 | l2=6 | l3=20 | d3=3,8 | l1=75 | r=0,3 | d2=4 | z=3 | KAC
working depthsuitable for high-speed millingespecially suitable for non-ferrous materialssolid carbideavailable from stock, without obligation
on request2
corner radius end mill 3 flutes for graphite
d1=4 | l2=6 | l3=25 | d3=3,8 | l1=75 | r=0,3 | d2=4 | z=3 | KAC
working depthsuitable for high-speed millingespecially suitable for non-ferrous materialssolid carbideavailable from stock, without obligation
on request1
corner radius end mill 3 flutes for graphite
d1=4 | l2=6 | l3=45 | d3=3,8 | l1=100 | r=0,3 | d2=4 | z=3 | KAC
working depthsuitable for high-speed millingespecially suitable for non-ferrous materialssolid carbideavailable from stock, without obligation
on request2
corner radius end mill 3 flutes for graphite
d1=4 | l2=6 | l3=10 | d3=3,8 | l1=50 | r=0,5 | d2=4 | z=3 | KAC
working depthsuitable for high-speed millingnew itemespecially suitable for non-ferrous materialssolid carbideavailable from stock, without obligation
on request1
corner radius end mill 3 flutes for graphite
d1=4 | l2=6 | l1=50 | r=1 | d2=4 | z=3 | KAC
suitable for high-speed millingespecially suitable for non-ferrous materialson requestsolid carbide
on request1
corner radius end mill 3 flutes for graphite
d1=4 | l2=6 | l3=10 | d3=3,8 | l1=50 | r=1 | d2=4 | z=3 | KAC
working depthsuitable for high-speed millingespecially suitable for non-ferrous materialssolid carbideavailable from stock, without obligation
on request1
corner radius end mill 3 flutes for graphite
d1=4 | l2=6 | l3=15 | d3=3,8 | l1=50 | r=1 | d2=4 | z=3 | KAC
working depthsuitable for high-speed millingespecially suitable for non-ferrous materialssolid carbideavailable from stock, without obligation
on request2
corner radius end mill 3 flutes for graphite
d1=4 | l2=6 | l3=20 | d3=3,8 | l1=75 | r=1 | d2=4 | z=3 | KAC
working depthsuitable for high-speed millingespecially suitable for non-ferrous materialssolid carbideavailable from stock, without obligation
on request1
corner radius end mill 3 flutes for graphite
d1=4 | l2=6 | l3=25 | d3=3,8 | l1=75 | r=1 | d2=4 | z=3 | KAC
working depthsuitable for high-speed millingespecially suitable for non-ferrous materialssolid carbideavailable from stock, without obligation
on request3
corner radius end mill 3 flutes for graphite
d1=4 | l2=6 | l3=45 | d3=3,8 | l1=100 | r=1 | d2=4 | z=3 | KAC
working depthsuitable for high-speed millingespecially suitable for non-ferrous materialssolid carbideavailable from stock, without obligation
on request2
corner radius end mill 3 flutes for graphite
d1=5 | l2=7,5 | l3=10 | d3=4,8 | l1=57 | r=0,3 | d2=5 | z=3 | KAC
working depthsuitable for high-speed millingespecially suitable for non-ferrous materialssolid carbideavailable from stock, without obligation
on request1
corner radius end mill 3 flutes for graphite
d1=5 | l2=7,5 | l3=20 | d3=4,8 | l1=75 | r=0,3 | d2=5 | z=3 | KAC
working depthsuitable for high-speed millingespecially suitable for non-ferrous materialssolid carbideavailable from stock, without obligation
on request1
corner radius end mill 3 flutes for graphite
d1=5 | l2=35 | l1=75 | r=0,3 | d2=5 | z=3 | KAC
especially suitable for non-ferrous materialson requestsolid carbide
on request1
corner radius end mill 3 flutes for graphite
d1=5 | l2=7,5 | l3=45 | d3=4,8 | l1=100 | r=0,3 | d2=5 | z=3 | KAC
working depthsuitable for high-speed millingespecially suitable for non-ferrous materialssolid carbideavailable from stock, without obligation
on request1
corner radius end mill 3 flutes for graphite
d1=5 | l2=40 | l1=100 | r=0,3 | d2=5 | z=3 | KAC
especially suitable for non-ferrous materialson requestsolid carbide
on request1
corner radius end mill 3 flutes for graphite
d1=6 | l2=50 | l1=150 | r=0,2 | d2=6 | z=3 | KAC
especially suitable for non-ferrous materialson requestsolid carbide
on request1
corner radius end mill 3 flutes for graphite
d1=6 | l2=9 | l1=57 | r=0,3 | d2=6 | z=3 | KAC
suitable for high-speed millingespecially suitable for non-ferrous materialssolid carbideavailable from stock, without obligation
on request2
corner radius end mill 3 flutes for graphite
d1=6 | l2=9 | l3=15 | d3=5,8 | l1=57 | r=0,3 | d2=6 | z=3 | KAC
working depthsuitable for high-speed millingespecially suitable for non-ferrous materialssolid carbideavailable from stock, without obligation
on request1
corner radius end mill 3 flutes for graphite
d1=6 | l2=9 | l3=20 | d3=5,8 | l1=75 | r=0,3 | d2=6 | z=3 | KAC
working depthsuitable for high-speed millingespecially suitable for non-ferrous materialssolid carbideavailable from stock, without obligation
on request2
corner radius end mill 3 flutes for graphite
d1=6 | l2=9 | l3=25 | d3=5,8 | l1=75 | r=0,3 | d2=6 | z=3 | KAC
working depthsuitable for high-speed millingespecially suitable for non-ferrous materialssolid carbideavailable from stock, without obligation
on request1
corner radius end mill 3 flutes for graphite
d1=6 | l2=9 | l3=30 | d3=5,8 | l1=75 | r=0,3 | d2=6 | z=3 | KAC
working depthsuitable for high-speed millingespecially suitable for non-ferrous materialssolid carbideavailable from stock, without obligation
on request1
corner radius end mill 3 flutes for graphite
d1=6 | l2=9 | l3=45 | d3=5,8 | l1=100 | r=0,3 | d2=6 | z=3 | KAC
working depthsuitable for high-speed millingespecially suitable for non-ferrous materialssolid carbideavailable from stock, without obligation
on request3
corner radius end mill 3 flutes for graphite
d1=6 | l2=9 | l3=60 | d3=5,8 | l1=150 | r=0,3 | d2=6 | z=3 | KAC
working depthsuitable for high-speed millingespecially suitable for non-ferrous materialssolid carbideavailable from stock, without obligation
on request1
corner radius end mill 3 flutes for graphite
d1=6 | l2=60 | l1=150 | r=0,3 | d2=6 | z=3 | KAC
especially suitable for non-ferrous materialson requestsolid carbide
on request1
corner radius end mill 3 flutes for graphite
d1=6 | l2=9 | l3=15 | d3=5,8 | l1=57 | r=0,5 | d2=6 | z=3 | KAC
working depthsuitable for high-speed millingnew itemespecially suitable for non-ferrous materialssolid carbideavailable from stock, without obligation
on request2
corner radius end mill 3 flutes for graphite
d1=6 | l2=9 | l3=45 | d3=5,8 | l1=100 | r=0,7 | d2=6 | z=3 | KAC
working depthsuitable for high-speed millingespecially suitable for non-ferrous materialson requestsolid carbide
on request2
corner radius end mill 3 flutes for graphite
d1=6 | l2=9 | l1=57 | r=1 | d2=6 | z=3 | KAC
suitable for high-speed millingespecially suitable for non-ferrous materialssolid carbideavailable from stock, without obligation
on request2
corner radius end mill 3 flutes for graphite
d1=6 | l2=9 | l3=15 | d3=5,8 | l1=57 | r=1 | d2=6 | z=3 | KAC
working depthsuitable for high-speed millingespecially suitable for non-ferrous materialssolid carbideavailable from stock, without obligation
on request1
corner radius end mill 3 flutes for graphite
d1=6 | l2=9 | l3=20 | d3=5,8 | l1=75 | r=1 | d2=6 | z=3 | KAC
working depthsuitable for high-speed millingespecially suitable for non-ferrous materialssolid carbideavailable from stock, without obligation
on request1
corner radius end mill 3 flutes for graphite
d1=6 | l2=9 | l3=25 | d3=5,8 | l1=75 | r=1 | d2=6 | z=3 | KAC
suitable for high-speed millingespecially suitable for non-ferrous materialssolid carbideavailable from stock, without obligation
on request2
corner radius end mill 3 flutes for graphite
d1=6 | l2=9 | l3=30 | d3=5,8 | l1=75 | r=1 | d2=6 | z=3 | KAC
working depthsuitable for high-speed millingespecially suitable for non-ferrous materialssolid carbideavailable from stock, without obligation
on request2
corner radius end mill 3 flutes for graphite
d1=6 | l2=9 | l3=45 | d3=5,8 | l1=100 | r=1 | d2=6 | z=3 | KAC
working depthsuitable for high-speed millingespecially suitable for non-ferrous materialssolid carbideavailable from stock, without obligation
on request3
corner radius end mill 3 flutes for graphite
d1=6 | l2=9 | l3=60 | d3=5,8 | l1=150 | r=1 | d2=6 | z=3 | KAC
working depthsuitable for high-speed millingespecially suitable for non-ferrous materialssolid carbideavailable from stock, without obligation
on request2
corner radius end mill 3 flutes for graphite
d1=8 | l2=12 | l1=63 | r=0,5 | d2=8 | z=3 | KAC
suitable for high-speed millingespecially suitable for non-ferrous materialssolid carbideavailable from stock, without obligation
on request1
corner radius end mill 3 flutes for graphite
d1=8 | l2=12 | l3=20 | d3=7,8 | l1=63 | r=0,5 | d2=8 | z=3 | KAC
working depthsuitable for high-speed millingespecially suitable for non-ferrous materialssolid carbideavailable from stock, without obligation
on request2
corner radius end mill 3 flutes for graphite
d1=8 | l2=12 | l3=45 | d3=7,8 | l1=100 | r=0,5 | d2=8 | z=3 | KAC
working depthsuitable for high-speed millingespecially suitable for non-ferrous materialssolid carbideavailable from stock, without obligation
on request1
corner radius end mill 3 flutes for graphite
d1=8 | l2=12 | l3=60 | d3=7,8 | l1=150 | r=0,5 | d2=8 | z=3 | KAC
working depthespecially suitable for non-ferrous materialssolid carbideavailable from stock, without obligation
on request3
corner radius end mill 3 flutes for graphite
d1=8 | l2=12 | l1=63 | r=1 | d2=8 | z=3 | KAC
suitable for high-speed millingespecially suitable for non-ferrous materialssolid carbideavailable from stock, without obligation
on request2
corner radius end mill 3 flutes for graphite
d1=8 | l2=12 | l3=20 | d3=7,8 | l1=63 | r=1 | d2=8 | z=3 | KAC
working depthsuitable for high-speed millingespecially suitable for non-ferrous materialssolid carbideavailable from stock, without obligation
on request2
corner radius end mill 3 flutes for graphite
d1=8 | l2=20 | l1=75 | r=1 | d2=8 | z=3 | KAC
especially suitable for non-ferrous materialson requestsolid carbide
on request1
corner radius end mill 3 flutes for graphite
d1=8 | l2=12 | l3=45 | d3=7,8 | l1=100 | r=1 | d2=8 | z=3 | KAC
working depthsuitable for high-speed millingespecially suitable for non-ferrous materialssolid carbideavailable from stock, without obligation
on request1
corner radius end mill 3 flutes for graphite
d1=8 | l2=12 | l3=60 | d3=7,8 | l1=150 | r=1 | d2=8 | z=3 | KAC
working depthespecially suitable for non-ferrous materialssolid carbideavailable from stock, without obligation
on request2
corner radius end mill 3 flutes for graphite
d1=10 | l2=15 | l1=72 | r=0,5 | d2=10 | z=3 | KAC
suitable for high-speed millingespecially suitable for non-ferrous materialssolid carbideavailable from stock, without obligation
on request2
corner radius end mill 3 flutes for graphite
d1=10 | l2=15 | l3=25 | d3=9,8 | l1=100 | r=0,5 | d2=10 | z=3 | KAC
working depthsuitable for high-speed millingespecially suitable for non-ferrous materialssolid carbideavailable from stock, without obligation
on request2
corner radius end mill 3 flutes for graphite
d1=10 | l2=15 | l3=45 | d3=9,8 | l1=100 | r=0,5 | d2=10 | z=3 | KAC
working depthsuitable for high-speed millingespecially suitable for non-ferrous materialssolid carbideavailable from stock, without obligation
on request2
corner radius end mill 3 flutes for graphite
d1=10 | l2=15 | l3=60 | d3=9,8 | l1=150 | r=0,5 | d2=10 | z=3 | KAC
working depthsuitable for high-speed millingespecially suitable for non-ferrous materialssolid carbideavailable from stock, without obligation
on request1
corner radius end mill 3 flutes for graphite
d1=10 | l2=15 | l3=45 | d3=9,8 | l1=100 | r=0,7 | d2=10 | z=3 | KAC
working depthsuitable for high-speed millingespecially suitable for non-ferrous materialson requestsolid carbide
on request1
corner radius end mill 3 flutes for graphite
d1=10 | l2=15 | l1=72 | r=1 | d2=10 | z=3 | KAC
suitable for high-speed millingespecially suitable for non-ferrous materialssolid carbideavailable from stock, without obligation
on request2
corner radius end mill 3 flutes for graphite
d1=10 | l2=15 | l3=25 | d3=9,8 | l1=100 | r=1 | d2=10 | z=3 | KAC
working depthsuitable for high-speed millingespecially suitable for non-ferrous materialssolid carbideavailable from stock, without obligation
on request1
corner radius end mill 3 flutes for graphite
d1=10 | l2=15 | l3=45 | d3=9,8 | l1=100 | r=1 | d2=10 | z=3 | KAC
working depthsuitable for high-speed millingespecially suitable for non-ferrous materialssolid carbideavailable from stock, without obligation
on request2
corner radius end mill 3 flutes for graphite
d1=10 | l2=15 | l3=60 | d3=9,8 | l1=150 | r=1 | d2=10 | z=3 | KAC
working depthsuitable for high-speed millingespecially suitable for non-ferrous materialssolid carbideavailable from stock, without obligation
on request2
corner radius end mill 3 flutes for graphite
d1=12 | l2=18 | l1=83 | r=0,5 | d2=12 | z=3 | KAC
suitable for high-speed millingespecially suitable for non-ferrous materialssolid carbideavailable from stock, without obligation
on request2
corner radius end mill 3 flutes for graphite
d1=12 | l2=18 | l3=25 | d3=11,8 | l1=83 | r=0,5 | d2=12 | z=3 | KAC
working depthsuitable for high-speed millingespecially suitable for non-ferrous materialssolid carbideavailable from stock, without obligation
on request2
corner radius end mill 3 flutes for graphite
d1=12 | l2=18 | l3=45 | d3=11,8 | l1=100 | r=0,5 | d2=12 | z=3 | KAC
working depthsuitable for high-speed millingespecially suitable for non-ferrous materialssolid carbideavailable from stock, without obligation
on request2
corner radius end mill 3 flutes for graphite
d1=12 | l2=18 | l3=60 | d3=11,8 | l1=150 | r=0,5 | d2=12 | z=3 | KAC
working depthsuitable for high-speed millingespecially suitable for non-ferrous materialssolid carbideavailable from stock, without obligation
on request2
corner radius end mill 3 flutes for graphite
d1=12 | l2=18 | l3=25 | d3=11,8 | l1=83 | r=0,7 | d2=12 | z=3 | KAC
working depthsuitable for high-speed millingespecially suitable for non-ferrous materialssolid carbideavailable from stock, without obligation
on request1
corner radius end mill 3 flutes for graphite
d1=12 | l2=18 | l1=83 | r=1 | d2=12 | z=3 | KAC
suitable for high-speed millingespecially suitable for non-ferrous materialson requestsolid carbide
on request1
corner radius end mill 3 flutes for graphite
d1=12 | l2=18 | l3=25 | d3=11,8 | l1=83 | r=1 | d2=12 | z=3 | KAC
working depthsuitable for high-speed millingespecially suitable for non-ferrous materialson requestsolid carbide
on request1
corner radius end mill 3 flutes for graphite
d1=12 | l2=18 | l3=45 | d3=11,8 | l1=100 | r=1 | d2=12 | z=3 | KAC
working depthsuitable for high-speed millingespecially suitable for non-ferrous materialssolid carbideavailable from stock, without obligation
on request1
corner radius end mill 3 flutes for graphite
d1=12 | l2=18 | l3=60 | d3=11,8 | l1=150 | r=1 | d2=12 | z=3 | KAC
working depthsuitable for high-speed millingespecially suitable for non-ferrous materialssolid carbideavailable from stock, without obligation
on request2
corner radius end mill 3 flutes for graphite
d1=16 | l2=24 | l1=92 | r=1 | d2=16 | z=3 | KAC
suitable for high-speed millingespecially suitable for non-ferrous materialssolid carbideavailable from stock, without obligation
on request1
corner radius end mill 3 flutes for graphite
d1=16 | l2=24 | l3=45 | d3=15,8 | l1=100 | r=1 | d2=16 | z=3 | KAC
working depthsuitable for high-speed millingespecially suitable for non-ferrous materialssolid carbideavailable from stock, without obligation
on request2
tip: in case you are logged in, you can use all functions (e.g. basket).